Audio Subwoofers
Showing 25–48 of 68 results
- Audio Subwoofers
MTX Audio TNP212D2 Terminator Power...
Complete amplified bass package bundles 2 x 12 subwoofer enclosure and mono block amplifier
TNA251 amplifier delivers 250 watts x 1 at 2 ohms; 150 watts x 1 at 4 ohms
Variable low- and high-pass filters offer 40Hz–400Hz range for sound shapingSKU: n/a - Audio Subwoofers
Pair of Soundstream T5.154 15″...
Overcompensating Motor Structure for Increased Magnetic Strength | 12mm T-Yoke and Top Plate Improve Low Frequency Dynamics | Vented T-Yoke and Frame Reduces Voice Coil Heat Build Up
Non-magnetic Non-resonate Die-Cast Aluminum Frame | 3″ 4-Layer Voice Coil with Direct Connect Wire Increases Power Handling | High Temperature Tolerance Adhesives Resist Thermal Failure
Non-Transfer Spruce Pulp Cone with UV and Chemical Protection | Stitched and Glued Surround/Cone Joints for Strongest Bonding | Extended Excursion Polyether Foam Surround with UV and Chemical Protection | Dual Poly-Cotton Suspension Dampen Violent AccelerationsSKU: n/a - Audio Subwoofers
Pyle 6.5 Inch Mid Bass Woofer Sound...
: AUTO SPEAKER SYSTEMS: Pyle GEARX series woofer is the latest series which have been designed and engineered for consistent and high performance The 65 inch feature an eye-catching yellow CD PP cone for plenty of stiffness without added weight
LOW IMPEDANCE: The 4 ohm component audio speaker compensates the undersized wire found in many of today’s cars It also make the most of every 300 watts peak power your car stereo can deliver with rubber magnet boot cover
MID BASS WOOFER: Pyle pro mid bass woofer sound speaker system has 30 oz magnet structure and 60 Hz – 20 kHz frequency response that complete the package It helps to provide smooth, loud and detailed soundSKU: n/a - Audio Subwoofers
Pyle Car Subwoofer Audio Speaker...
800 WATT POWER: This 8in car subwoofer has a power of 400 Watt RMS to 800 Watt peak that will produce high sound resonance. It also has a spring loaded push down speaker terminals that will maximize sound quality
UNMATCHED PERFORMANCE: Built with 40 oz. magnet that will enhance car stereo or radio by producing a powerful audio and unmatched performance. It comes with a sensitivity or SPL of 89dB to resonate perfect clarity
DUAL VOICE COIL: The speaker subwoofer comes with a dual 4 Ohm impedance that can be wired as 4 or 8 Ohm. The 1.5″ 4-layer voice coil can resist corrosion and ensure a longer life spanSKU: n/a - Audio Subwoofers
Rockford Fosgate P1S4-15 Punch...
Known as “The Woofer of Choice” for fanatic car audio systems, the P1 series is the first in a family of world-famous subwoofers called “The Punch”
The Punch P1S4-15 is a 15” 4-Ohm SVC (single voice coil) subwoofer with 250 Watts RMS / 500 Watts Max power handling and custom 10-AWG nickel plated push terminals
Featuring a kevlar fiber reinforced paper cone that deliver bass impact you can feel, and our proprietary spider plateau venting design provides cooling of the voice coil to increase the woofer lifeSKU: n/a - Audio Subwoofers
Rockford Fosgate P2D2-12 Punch...
Rockford Fosgate has always been known as “The PUNCH” and the P2 car subwoofer series certainly continues with the tradition
The Punch P2D2-12 is a 12” 2-Ohm DVC (dual voice coil) subwoofer with 400 Watts RMS / 800 Watts Max power handling and custom 10-AWG nickel plated push terminals
Featuring a kevlar fiber reinforced paper cone that deliver bass impact you can feel, and our proprietary spider plateau venting design provides cooling of the voice coil to increase the woofer lifeSKU: n/a - Audio Subwoofers
Rockford Fosgate P2D4-12 Punch...
Rockford Fosgate has always been known as “The PUNCH” and the P2 car subwoofer series certainly continues with the tradition.
The Punch P2D4-12 is a 12” 4-Ohm DVC (dual voice coil) subwoofer with 400 Watts RMS / 800 Watts Max power handling and custom 10-AWG nickel plated push terminals.
Featuring a kevlar fiber reinforced paper cone that deliver bass impact you can feel, and our proprietary spider plateau venting design provides cooling of the voice coil to increase the woofer life.SKU: n/a - Audio Subwoofers
Rockford Fosgate P300-12 Punch...
The Punch P300-12 is a self-contained all-in-one solution featuring a Punch 12” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier
The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving – Dimensions (Wedge H x W x D1 x D2): 15” x 19.8” x 11” x 7”
Featuring an adjustable 12db/Octave low pass crossover, built-in adjustable bass EQ, built-in 0°/180° phase switch and Remote bass level control includedSKU: n/a - Audio Subwoofers
Rockford Fosgate P3D2-10 Punch...
The P3 Series is Rockford Fosgate’s best performing Punch subwoofer delivering reference quality bass in our most popular models
The Punch P3D2-10 is a 10” 2-Ohm DVC (dual voice coil) subwoofer with 500 Watts RMS / 1000 Watts Max power handling and custom 10-AWG nickel plated push terminals
Featuring anodized aluminum cones and dustcaps, with a unique spider venting design to keep the motor cooler and a new hybrid stamp-cast basket providing super strength while minimizing weight and resonanceSKU: n/a - Audio Subwoofers
Rockford Fosgate P3D4-12 Punch...
The P3 Series is Rockford Fosgate’s best performing Punch subwoofer delivering reference quality bass in our most popular models
The Punch P3D4-12 is a 12” 4-Ohm DVC (dual voice coil) subwoofer with 600 Watts RMS / 1200 Watts Max power handling and custom 10-AWG nickel plated push terminals
Featuring anodized aluminum cones and dustcaps, with a unique spider venting design to keep the motor cooler and a new hybrid stamp-cast basket providing super strength while minimizing weight and resonanceSKU: n/a - Audio Subwoofers
Rockford Fosgate R2SD2-10 Prime...
The Prime R2SD2-10 is a shallow 10″ subwoofer, designed for spaces where traditional sized woofers will not fit, but delivers full size bass
This 10” subwoofer handles 200 Watts RMS / 400 Watts Max and the 2-Ohm Dual Voice Coil design lets you to wire them in various configurations
The R2SD2-10 10” subwoofer is optimized for sealed enclosures and has a mounting depth of 3.417” and require a cutout diameter of 9.125”SKU: n/a - Audio Subwoofers
Rockville RTB10A 10″ 500w...
Rockville RTB10A 10“ 500w Powered Subwoofer Bass Enclosure With Bass Remote. 500 Watts Peak/250 Watts RMS. 10“ High power woofer in vented tubular enclosure. Integrated, built-in 250 Watts RMS Rated amplifier. Rear aero vent bass system
Speaker level and RCA line-level input. Frequency response: 30Hz-200Hz. Sensitivity: 108 db. Adjustable bass crossover. Dashboard adjustable bass remote control
Molded steel woofer grill. Four steel mounting jackets + two canvas straps with Velcro fasteners. Tube is covered in durable aviation grade tweed with embroidered logo. Dimensions: 10. 75” x 20. 86“SKU: n/a - Audio Subwoofers
Rockville RTB12A 12″ 600w...
12“ 600w Powered Subwoofer Bass Enclosure With Bass Remote. Rear aero vent bass system. Speaker level and RCA line-level input
Adjustable bass crossover. Dashboard adjustable bass remote control. Molded steel woofer grill
Four steel mounting brackets + two canvas straps with Velcro fasteners. Tube is covered in durable aviation grade tweed with embroidered logoSKU: n/a